Aaa Industries Mumbai, Maharashtra

Send SMS
Contact Us

PTFE Anti Corrosion Coatings & Linings

PTFE Coated Studs, Nuts & Bolts

PTFE Coated Studs, Nuts & Bolts

Fluoro polymer (PTFE)/xylan coated Fasteners, Studs, Nuts, Bolts, Washers best suited for installations in offshore platforms, petrochemical and chemical plants, installations near the sea and in corrosive environments.

We offer PTFE and xylan coated fasteners which are high on demand list in the market that contain PTFE or other types of lubricants.

PTFE Food Grade Non Stick Coating On Moulds And Rollers

PTFE Food Grade Non Stick Coating On Moulds And Rollers

Our PTFE Coated surfaces are both oleo phobic and hydrophobic, they are not readily wet, cleanup is easier, more through and in many cases self cleaning. Self-lubricating, Heat Resistant properties.

PTFE Lined Pipes Fittings

PTFE Lined Pipes Fittings

Used for both vacuum and pressure condition. Also supplied 900 and 450 elbows, tees, reducers, reducing flanges, blind flanges, spacers dip pipes, spargers and thermocouple.

Properties:


Resistance to virtually all chemicals and oxidizing acids high thermal stability.Non- stick, low co/efficient of friction, excellent insulating properties, Low weather ability and thus non- aging.

Typical Application:


Industries like Chemicals, Drugs and Pharmaceuticals, Electrical, Electronics and Communication, Fertilizers, Pesticides, Petrochemicals, Nuclear power, Oil Exploration, food Processing, Defense, Aerospace etc.

PTFE Lining

PTFE Lining

We offer PTFE lining which are available in natural or statically dissipate to prevent the build up of static charges and reduce the static electricity on the surface of rollers.

We refer to these liners as conductive, which can be availed from us at industry leading prices.

PTFE Non Stick Coating

PTFE Non Stick Coating

AAA industries undertakes PTFE non-stick, non-wetting, anti-static, self-lubricating, heat-resistant properties, thickness from 25 microns and above.

Very low adhesion to most materials, excellent water repellent, low-coefficient of friction, chemical inertness, and unusual thermal stability.

Not attacked by corrosive chemical or strong solvent.

Top 7 advantages & properties of PTFE coatings

1. Non-stick:

very few solid substances will permanently adhere to tefcottm coating and while tacky materials may show some adhesion, almost all substances release easily.

2. Non-wetting:

tefcottm surface are both oleo phobic and hydrophobic, they are not readily wet, clean-up is easier, more through and in many cases self-cleaning.

3. Heat resistance:

there is no decomposition of tefcottm below 250oc, insignificant decomposition between 250o and 300° which requires no special precautions.

4. Low coefficient of friction:

the coefficient of friction of tefcottm © is generally in the range of 0. 05 to 0. 20, depending on the load sliding speed.

5. Cryogenic stability:

tefcot™ will withstand severe temperature extremes without loss of physical properties.

6. Unique electrical properties:

over a wide range of frequencies, tefcottm has high dielectric strength, a low dissipation factor, and very high surface receptivity.

7. Chemical resistance:

tefcottm is normally unaffected by chemical environments. The only chemicals known to affect all are the alkali metals and highly reactive fluorinating agents.

PTFE/Halar/PVDF Coating And Linings

PTFE/Halar/PVDF Coating And Linings

Fluoropolymer /ECTFE (Halar)/PTFE/PVDF/FEP/PFA Thick Coating- Blion

BLION- A pinhole free homogeneous thick coating of PVDF (KYNAR), FEP, PFA, ETFE, ECTFE (HALAR).

It has the extraordinary chemical resistance on chemical equipments parts. Any articles of intricacy shape can be processed. We also provide Coating Service.


Properties:

Rilsan Coating For Automobile & Medical Industries

Rilsan Coating For Automobile & Medical Industries

Item Code: Rilsan coating rilsan / polyamide 11 / Nylon/ PP/ PVC Coating for Defense, Electronic Industries

Modern new approach the plastic coating to combine metals and of plastic into a single functional part.

Various sizes, shapes and intricacy can be coated with plastic Powder like Polyethylene, PVC, CAB, Plastisol, Epoxy, Polyester, Nylon, PTFE, PP, PU etc.

Properties:


Metals can be insulated, decorated, self-lubricated and protected from chemicals. 

Typical Application:


Automobile parts, Medical Parts, Door Handle, Wheel of valves, grills etc.

Polyurethane Coating Services

Polyurethane Coating Services

Polyurethane Coating Services offered comes in options of different polyurethane coating support as demanded by customers.

Some of its features include:

 

X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for PTFE Anti Corrosion Coatings & Linings ?

    country-ico

    We will contact you soon !

    Ab Khan

    (Proprietor)

    Aaa Industries

    Noor Baug, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us